Look under almost any dust collector and you will see a rotary airlock valve spinning its rotor and emptying the collected contents from the hopper. These valves have long been used to maintain a seal in vacuum dust collection systems while simultaneously providing an escape route for the dust. 

The advantages of a rotary airlock for dust collectors include automatic hopper emptying, minimal vacuum pressure loss, and the many options available to meet specific application needs. Rotary valves can be custom fit to handle high temperatures, harsh chemical environments, and abrasive materials. Rotary valves do, however, have a few major drawbacks.

Rotary Airlocks Drawbacks

Because rotary airlocks are sealed tight to the atmosphere they can be very difficult to clean. Cleaning a rotary valve often involves removing the drive assembly, end plate, and finally the rotor. This process can take hours to perform. Rotary valves are also expensive to operate. Typically, these valves are left running continuously, even when there is no dust present in the hopper. This not only wastes electricity but puts undue wear on the valve. Repair and replacement parts for rotary airlock valves can be quite costly as well. Even with these shortcomings, the rotary airlock remains the industry standard for most dust discharge applications.

Non-Powered Automatic Dust Discharge Valve

One alternative which has been gaining popularity is a non-powered automatic dust discharge valve. These valves, like the Armadillo and Platypus Vacu-Valves from Aerodyne, rely on the negative pressure (max -18″ W.C.) of a dust collector to hold a rubber sleeve closed to maintain an airlock. As the weight of the dust in the hopper builds up, the sleeve is forced open and dust is discharged from the valve. Leaf springs inserted into the valves sleeve also help to counterbalance the vacuum. 

The valves are available with a variety of sleeve materials for different applications. While these valves cannot be used in every dust collection system they are a very economical alternative to expensive rotary valves.

The Vacu-Valves from Aerodyne are priced at a fraction of the cost of standard rotary airlock valves and require no electricity to operate. These valves have no controls and require no lubrication. They easily handle abrasive materials that would jam or wear out a rotary valve.

To improve efficiency and safety, there is no substitute for an on-site inspection by an experienced expert. Click below to start with a free 20-minute phone consultation by clicking the button.

Do the rotary valves under your dust collectors cause maintenance headaches?  Are they clogging?  Are you having to drop everything and assign extra labor to fix them?

The disadvantages of Rotary Valve

Most dust collectors are equipped with a motor-driven rotary airlock valve that empties contents from the hoppers. Rotary valves have been used for many years and are probably the most widely used airlock design. However, maintaining rotary valves is difficult and time consuming. These valves run continuously, regardless if dust is present, which leads to wasted electricity. In addition, the valves can wear out rapidly, resulting in costly repairs and replacements.

Best Alternative: Aerodyne Vacu-Valve ^®

A highly cost-effective alternative is Aerodyne’s Vacu-Valve ^®  Trickle Valve System. The Vacu-Valve relies on the negative pressure of the material handling system to hold the duckbill sleeve closed. As the dust or material builds up, the sleeve is forced open, allowing the contents to discharge. Once emptied, the negative pressure then immediately closes the duckbill again. This trickle valve system requires no lubrication, power, or controls. Materials that would normally jam or wear out a rotary airlock valve, the Vacu-Valve handles with ease. There is a variety of duckbill sleeve options designed for specific applications; and the Aerodyne Vacu-Valve ^® is available in an open or closed design, to further accommodate the particular application.

Aerodyne’s Vacu-Valve ^® is the solution! Have a look at this infographic and to learn how the Vacu-valve solves these issues and improves the discharge efficiency of your baghouse, filters and cyclones.

How Do Vacu-Valve Dust Valves Work?

To learn more about which dust collector, please contact our experts at 440-543-7400 or visit our website: www.dustcollectorhq.com.

To improve efficiency and safety, there is no substitute for an on-site inspection by an experienced expert. Click below to start with a free 20-minute phone consultation by clicking the button.